 |
To Turn ON The Alarm
- Close all doors & windows. Display will Show: SYSTEM
READY / ZONES NORMAL
- Enter your Code
and press:
- ARM If everyone
is leaving building
- AUX-ARM
If anyone is staying in the building
- The display will show SYSTEM
ARMING EXIT NOW
You have 40 seconds to exit via an Entry Exit Door. |
| |
 |
Turning OFF The Alarm
If the system is on when you enter, the buzzer in the keypad
will sound. You have 40 seconds to enter your code.
- Enter your Code.
Red light will turn green.
|
| |
 |
Bypassing A Zone
Display will not show SYSTEM READY / ZONES NORMAL.
- Enter your Code.
- Press SCAN to
see name of zone or zone number.
- Press BYPASS
to bypass that zone or go close it. Repeat SCAN,
BYPASS for all
open zones.
- When finished, press CLEAR,
then ARM or AUX
ARM to start arming the system.
|
| |
 |
If the BELL is Ringing
- Enter your Code
and press CLEAR.
- Wait 30 seconds, then call Denalect Alarm at 925-935-2680.
|
| |
 |
Power Failure - Keypad Keeps Beeping
- Display will show AC Failure.
- Enter your Code
then press RESET.
|
| |
|
Silencing the Fire Alarm
When there is a fire, the bell rings intermittently.
When there is a burglary, the bell rings steadily.
- Enter in your Code,
this will silence the bell.
- Before resetting the smoke detectors, check each one and note
which one(s) has a steady red light on. Our service technician
will need this information.
Do Not Reset the fire alarm unless you are sure there is no fire.
- Enter your code then press RESET
to reset the smoke detectors.
If there is still smoke, they will not reset. Call Denalect at
935-2680
|
